NC DRILLING MACHINE
RVD12NC
RVD20NC
RVD25NC
RVD40NC
STANDARD FEATURES
Ideal for high productivity
Ideal for multi spindle and single spindle drilling
Precision Linear Motion Guideways
Built in cylinder
High rapid drilling advance and retract speed
Adjustable rapid and feed travel length
Adjustable feed rate
Precisely bored, coned, plated cylinders
Hardened and grounded spindle nose thread grounded
Balanced drive pulleys
Fabricated cabinet with built in tank & chip tray
Max adjustable daylight for wide range fixture accommodation
Grounded steel column
OPTIONAL FEATURES
Peck drilling attachment
Coolant system
Auto coolant system
Part counter
Tool breakage sensor
Pneumatic linear table attachment
Rotary table attachment
Part holding jig and fixture
| Model | RVD12NC | RVD20NC | RVD25NC | RVD40NC |
|---|---|---|---|---|
| Max Drilling Cap In steel(400n/mm2) | 12 mm | 20 mm | 25 mm | 38 mm |
| Spindle Nose | PB20 | PB25 | PB-28/ BT-30 | BT-40 |
| Spindle Motor in kw | 0.75KW/440V | 1.1kW/440V | 2.2Kw/440v | 11kw/440v |
| Spindle Speed max in rpm | 2000 | 1200 | 3000 | 3000 |
| Total Travel in mm (Z-axis) | 150 | 150 | 300 | 350 |
| Table Dia in mm (Tapper holes M10) | 200 | 200 | 300 | 400 |
| spindle centre to column in mm | 175 to 275 | 175 to 275 | - | - |
| Dis Between Table To Spindle Min/Max in mm | 100 To 450 | 100 To 600 | 100 To 450 | 150 To 500 |
| Control | PLC | PLC | PLC | PLC |
| Machine Dimension LBH in mm (Approx) | 575 x 715 x 1650 | 810 x 920 x 1950 | 1750 x 2000 x 2500 | 1750 x 2000 x 2600 |
| Power Rating | 2kW/440VV /50Hz | 4kW/440VV /50Hz | 7KW/440VV /50Hz | 15KW/440VV /50Hz |
