Motor Body Drilling Tapping SPM



No of Axis : 3(LH, RH & REAR),
No of Operations : 16Nos
LH : Drill Ø10.5x1No, drill Ø3.3 x 3Nos
RH : Drill Ø10.5x1No, drill Ø2.2mm x 4Nos
Rear : Drill Ø10.5x1No, drill Ø6.8mm x 1No,Drill Ø3.3x5Nos
Cycle time : 20Sec


  E - Broucher
  E - Broucher
  E - Broucher




MOTOR COVER DRILLING TAPPING SPM



Part : End cover
No of operation : 9 ,
Drilling : Dia 6.7 mm x 3 Nos,
Drilling : Dia 4.1 x 3 Nos ,
Tapping : M 5 X 3 Nos ,
Operation cycle Time : 20 sec


PUMP CASING DRILLING TAPPING SPM


PART : Stage Casing
No of operation : 12
Drilling : Dia 5.1 x 6 nos
Tapping M6 x 6 nos
Operation cycle time : 15 sec


ALTERNATOR COVER DRILLING TAPPING SPM



SHAFT FACE DRILLING TAPPING SPM


DRILLING DIA 4.2  x 2 nos 
cycle time 30 sec 
DRILL UNIT RVD 12-80-P  - 1 No
TAP UNIT RVT 16-6- 1 No
2  SPINDLE DRILL HEAD - No
2 SPINDLE TAP HEAD - 1 No
PART HOLDING 3 JAW SELF CENTERING CHUCK
FLOOD COOLANT SYSTEM  AUTO LUBRICATION 
PLC ELECTRICALS 


TEXTILE PART DRILLING TAPPING SPM



Drill Unit RVD 12-125 -P - 2 Nos
Tap Unit RVT 16-60 - 2 Nos
2 Spindle Drill Head With Mobile Jig Bush Plate - 2 Nos
2 Spindle Tap Head - 2 Nos
NO OF OPERATION 8
OPERATION CYCLE TIME 30 SEC
Drilling Dia 6.8 X 2 Nos
Drilling Dia 10.5 X 2 Nos
Tapping M8 X 2 Nos
Tapping M10 X 2 Nos


CARBURATOR DRILLING REAMING SPM