PCD max 400 mm
Programmable fast indexing
No of indexing 2, to 12 and possible customized nos
Programmable return travel sensor
Built in cylinder
High rapid drilling advance and retract speed
Adjustable rapid and feed travel length
Adjustable feed rate
Precisely bored, coned, chrome plated cylinders
Precisely grounded chrome plated quill
Hardened and grounded spindle, nose thread grounded
Grounded steel column
Balanced drive pulleys
Fabricated cabinet with built in tank & chip tray
Max adjustable daylight for wide range fixture accommodation
Grounded steel column
Peck drilling attachment
Coolant system
Part counter
Tool breakage sensor
Part holding jig and fixture
Cartridge Spindle
Tool Auto Clamping
MODEL | PCD12P | PCD20P | PCD25H | PCD40H |
---|---|---|---|---|
Max Drilling Cap In steel(400n/mm2) | 12mm | 20mm | 25mm | 38mm |
PCD Max in mm | 200 | 250 | 400 | 400 |
No of indexing ( servo) | 2,3,4,6,8,10 &12 | 2,3,4,6,8,10 &12 | 2 To 100 | 2 To 100 |
Spindle Nose | PB20 | PB25 | PB28/BT30 | BT40 |
Spindle Motor in kw | 0.75KW/440V | 1.1kW/440V | 2.2KW/440V | 5.5kW/440V |
Spindle Speed | 600/800/1200 | 320/400/530 | - | - |
Total Travel in mm (Z-axis) | 125 | 125 | 300 | 350 |
Working Travel in mm | 25 | 25 | - | - |
Thrust Force Kgf @6 kgcm2 | 240 | 395 | - | - |
Table Dia in mm (Tapper holes M10) | 200 | 200 | 300 | 400 |
spindle centre to column in mm | 175 to 275 | 175 to 275 | - | - |
Dis Between Table To Spindle Min/Max in mm | 100 To 450 | 100 To 600 | 100 To 450 | 150 To 500 |
Control | PLC | PLC | PLC | PLC |
Machine dim ( L x B x H) in mm (Approx) | 575 x 715 x 1650 | 810 x 920 x 1950 | 1750 x 2000 x 2500 | 1750 x 2000 x 2600 |
Power Rating | 2kW/440V/50Hz | 3kW/440V/50Hz | 7KW/440V/50Hz | 11KW/440V/50Hz |